Spiral conical cutters

Spiral conical cutters
Showing 1 to 2 of 2 (1 Pages)
Two flutes cone ballnose cutter 6х25х60х R 0.5

Two flutes cone ballnose cutter 6х25х60х R 0.5

450.00грн.

The conical spiral 2-tooth mill with a spherical end is used for roughing and finishing of reliefs.The cone adds stiffness to the milling cutter, which allows the processing of the relief without roughing operations. Depending on the diameter of the tip, you can perform a different accuracy of detai..
Two flutes cone ballnose cutter 8x16x50x R1.5

Two flutes cone ballnose cutter 8x16x50x R1.5

560.00грн.

The conical spiral 2-tooth mill with a spherical end is used for roughing and finishing of reliefs.The cone adds stiffness to the milling cutter, which allows the processing of the relief without roughing operations. Depending on the diameter of the tip, you can perform a different accuracy of detai..
Showing 1 to 2 of 2 (1 Pages)