Rough cutters (Chipstick)

Rough cutters (Chipstick)
Showing 1 to 8 of 8 (1 Pages)
Rough 3-tooth (Chipstick) 10х40х80

Rough 3-tooth (Chipstick) 10х40х80

815.00грн.

Cutter Rough 3-tooth (Chip) is used for processing grooves, ledges, trimming material, and roughing rough terrain.Due to 3 teeth, this cutter ensures quiet operation and higher cleanliness of the treated surface.1 tooth that overlaps the center, allows you to perform a straight cut into the material..
Rough 3-tooth (Chipstick) 10х50х100

Rough 3-tooth (Chipstick) 10х50х100

985.00грн.

Cutter Rough 3-tooth (Chip) is used for processing grooves, ledges, trimming material, and roughing rough terrain.Due to 3 teeth, this cutter ensures quiet operation and higher cleanliness of the treated surface.1 tooth that overlaps the center, allows you to perform a straight cut into the material..
Rough 3-tooth (Chipstick) 6х30х60

Rough 3-tooth (Chipstick) 6х30х60

330.00грн.

Cutter Rough 3-tooth (Chip) is used for processing grooves, ledges, trimming material, and roughing rough terrain.Due to 3 teeth, this cutter ensures quiet operation and higher cleanliness of the treated surface.1 tooth that overlaps the center, allows you to perform a straight cut into the material..
Rough 3-tooth (Chipstick) 6х40х80

Rough 3-tooth (Chipstick) 6х40х80

412.00грн.

Cutter Rough 3-tooth (Chip) is used for processing grooves, ledges, trimming material, and roughing rough terrain.Due to 3 teeth, this cutter ensures quiet operation and higher cleanliness of the treated surface.1 tooth that overlaps the center, allows you to perform a straight cut into the material..
Rough 3-tooth (Chipstick) 6х50х100

Rough 3-tooth (Chipstick) 6х50х100

554.00грн.

Cutter Rough 3-tooth (Chip) is used for processing grooves, ledges, trimming material, and roughing rough terrain.Due to 3 teeth, this cutter ensures quiet operation and higher cleanliness of the treated surface.1 tooth that overlaps the center, allows you to perform a straight cut into the material..
Rough 3-tooth (Chipstick) 8х30х60

Rough 3-tooth (Chipstick) 8х30х60

502.00грн.

Cutter Rough 3-tooth (Chip) is used for processing grooves, ledges, trimming material, and roughing rough terrain.Due to 3 teeth, this cutter ensures quiet operation and higher cleanliness of the treated surface.1 tooth that overlaps the center, allows you to perform a straight cut into the material..
Rough 3-tooth (Chipstick) 8х40х80

Rough 3-tooth (Chipstick) 8х40х80

631.00грн.

Cutter Rough 3-tooth (Chip) is used for processing grooves, ledges, trimming material, and roughing rough terrain.Due to 3 teeth, this cutter ensures quiet operation and higher cleanliness of the treated surface.1 tooth that overlaps the center, allows you to perform a straight cut into the material..
Rough 3-tooth (Chipstick) 8х50х100

Rough 3-tooth (Chipstick) 8х50х100

760.00грн.

Cutter Rough 3-tooth (Chip) is used for processing grooves, ledges, trimming material, and roughing rough terrain.Due to 3 teeth, this cutter ensures quiet operation and higher cleanliness of the treated surface.1 tooth that overlaps the center, allows you to perform a straight cut into the material..
Showing 1 to 8 of 8 (1 Pages)